High And Low Temperature Test Chamber

Detaljer

Features : 1. The rectangular double-layer glass observation window can be used to observe the test product during the test. The observation window has an anti-sweat electric heater device to prevent condensation, and a high-brightness PL fluorescent lamp to keep the interior of the box illuminated. 2. It has a test hole for external test power cord or signal line and up and down adjustment of the storage tray. 3. The double-layer insulation of the box door is tight and airtight, which can effectively isolate the internal temperature leakage. 4. The special temperature rise and fall rate controllable technology realizes the continuous and arbitrary adjustment of the rise and fall rate. 5. The compressor circulation system can effectively remove the lubricating oil between the condenser tube and the capillary tube, and the whole series adopts environmentally friendly refrigerant. 6. The controller adopts imported LCD display screen, which can display the measured value, set value and time at the same time. 7. The controller has multi-segment program editing, humidity and temperature can be controlled quickly(QUICK) or slope(SLOP). 8. The built-in mobile sliding transport is easy to move and place and has a strong positioning screw to fix the position. Technical Parameters : Model BJPX-HL50C/D BJPX-HL80C/D/E BJPX-HL100C/D/E BJPX-HL150C/D/E BJPX-HL225C/D/E BJPX-HL408C/D/E BJPX-HL800C/D/E BJPX-HL1000C/D/E Capacity 50L 80L 100L 150L 225L 408L 800L 1000L Temperature Range Low temperature: C: -20℃; D: -40℃; E: -60℃ High temperature: 150℃ Humidity Range 20~98% RH T&H Analytical Accuracy ±0.1℃, ±1%RH T&H Uniformity ±1℃, ±2%RH T&H Control Accuracy ±0.5℃, ±1%RH T&H Fluctuation ±2℃, ±3%RH Heating/Cooling Rate Heating: 1~3°C/min (avg.); cooling: 0.7~1°C/min (avg.) Inner & Outer Material SUS304 Insulation Material High temperature resistant high-density ethyl chloroformate foam insulation material Cooling System Air cooling, single compressor: -20~-40℃ Air cooling, water cooling, double compressors: -60~-70℃ Safety Protection No-fuse switch, compressor overload protection switch, refrigerant high/low pressure protection switch, over-humidity and over-temperature protection switch, fuse, fault alarm system Power Supply AC 220V, 50/60Hz(Standard); 110V, 50/60Hz(Optional, external transformer) Wiring method: air switch AC 380V, 50/60Hz Wiring method: air switch Standard Accessory Observation window, 50mm test hole, PL box light, partition, wet and dry ball gauze, RS232, USB interface Optional Accessory Operating hole with built-in glass door Internal Size(W*D*H)mm 350*350*400 400*400*500 500*400*500 500*500*600 600*500*750 800*600*850 1000*800*1000 1000*1000*1000 External Size(W*D*H)mm 580*980*1350 950*1050*1400 1050*1050*1400 1050*1150*1500 1150*1150*1650 1350*1250*1750 1520*1550*1900 1550*1650*1900 Package Size(W*D*H)mm 700*1200*1500 1150*1250*1700 1250*1250*1700 1250*1350*1800 1350*1350*1950 1550*1450*2050 1750*1650*2200 1750*1850*2200 Net Weight 180kg 240kg 250kg 260kg 290kg 330kg 380kg 410kg Gross Weight 200kg 270kg 280kg 290kg 325kg 365kg 415kg 435kg